background image

15

16

Digital Door Lock

If you have opted to have your 

I

ntelli

C

old® Pharmacy Refrigerator fi tted with a digital 

combination lock, the key lock will be removed and the digital lock fi tted in it’s place. 

The digital combination lock has been designed to provide extra security for the contents of 

your pharmacy refrigerator. There is also a master override key (optional extra) that enables 

you to open the refrigerator in the normal way should you wish to or in an emergency. 

The 

Labcold

 digital combination lock is backed by a UK one year parts and labour warranty.

A Closer Look

Logo button

Lock handle in closed 

position

Slide up to unlock

Lock  handle in open 

position

Slide down to lock

Getting Started

Follow the instructions on page 4 -11 to set up your refrigerator.

We especially recommend that you install 4 AA batteries (not provided) in to the battery 

compartment located on the right hand side of the fridge near the base ( see page 2) because 

this will allow you to be able to open the digital lock if there is a failure of mains power.

IF BATTERIES ARE NOT FITTED, DURING A POWER FAILURE YOU WILL NOT BE ABLE 

TO UNLOCK THE REFRIGERATOR UNLESS YOU HAVE PURCHASED A MASTER KEY

Opening the Door

Once the refrigerator has power, you can now open the door using the factory set user code 

of 

2244

.

Put in the code and after every correct digit a green light will illuminate. Always wait for the 

LED to light before pressing the next button. After the fourth digit is entered the lock will 

make a noise signifying it has unlocked. You can then rotate the lock handle 90

o

 in a clockwise 

direction to open the fridge. 

If the red LED fl ashes it indicates you have either entered a wrong digit or the lock hasn’t 

registered the code you have entered and an error has occurred. Obviously, the refrigerator 

will not unlock. Wait 4 seconds before you try entering the code again.

If you DO NOT unlock the refrigerator within 4 seconds the door will re-lock automatically if 

the lock remains in the closed position. 

Locking the Door

Shut the fridge door as usual and slide the lock handle 90

o

 in an anti clockwise direction

  

The digital combination lock does NOT self lock but once the lock handle is in the closed 

position the lock will automatically engage.

LED lights

Light up green when the 

correct digit is entered

Red LED light

Lights up red if an 

incorrect digit is entered

Key lock

Green LEDs illuminate when 

you input the correct code

Red LED illuminates when you 

input the incorrect digit or code

Summary of Contents for IntelliCold RLDF 19 Series
















Reviews: