13. Quick Start Tutorial
20
D SERIES Tesira Quick Start Guide rev 1.2.0
13.4. Basic Configuration
In the Tesira software, double click the amplifier block. The D Series configuration window opens. Here you can
check the amplifier for any potential faults and warnings and monitor signal status. You can also control STANDBY/
ON state and other amplifier channel functions such as mute, level and invert. Also, the Auto power down (APD)
functionality can be configured (default APD is disabled).
The Configure amplifier button opens the CAFÉ application and imports and highlights the current amplifier.
NOTE: If a firewall is installed on your computer, you must give the CAFÉ application permissions to talk to the
amplifiers.
Within CAFÉ, you can configure basic amplifier functions.
In Frame view you can configure the amplifier’s STANDBY/ON state and the Breaker Emulation Limiter (BEL).
Through the menu, or through the expand button in the first column, you can enter the Channel view. From here
you can configure channel mute, amplifier gain and ISVPL limiter.
Through the menu button you can access the Load Monitoring menu to configure and enable LoadPilot
surveillance of the connected loads.
Through the menu button you can access the RPM configuration to configure power allocation among the
four channels.