33
For HELP, call La-Z-Boy
®
Spas at 1.800.465.2933.
CYCLE MODE
Cycle mode provides seven advanced 12-15 minute pre-programmed massage
sequences. Each sequence has three patterns:
warm-up
,
massage
, and
cool-down
.
Note
: The INTENSITY button
does not operate in this mode.
1. Press
the
On/Off
(Power) button
.
2. Press the Cycle button
. You should see the C1 (left-most) status light flash,
hear the AquaFlex Pump motor begin to change speeds, and feel the pressure in
the jets change intensity.
3. Press
again to change the mode (see Table 4). You should see the next status
light flash.
4. Press
to manually turn off the control.
5. After selecting the desired mode, the pump runs for 12-15 minutes in that mode
after which time it slows*.
Important
: All warm-up patterns are identical. The new massage pattern begins
about 6 minutes after the warm-up pattern.
Mode
Description
Jet pressure
C1
Shiatsu –
A gradually increasing stroke to help correct imbalances
in the body.
C2
Deep –
A sustained, intense pressure to penetrate deep within
tissues.
C3
Thai –
A rhythmic, pressing action that helps loosen tense muscles.
C4
Classic –
A mild, sweeping technique that relaxes and soothes the
body.
C5
Sport –
A pulsating pressure that stimulates and invigorates
muscles.
C6
Swedish –
A gentle technique that helps to improve circulation.
C7
Relaxation –
A marvelous technique to help instill a meditative
state.
Table 4 - Massage Patterns
*For Pump 3 (and Pump 1 in filter cycle mode), it slows to 40% and turns off after 20 minutes. For Pump
1 in constant filtration mode it slows to 20% but does not shut off.
