background image

MANUAL FOR USE AND MAINTENANCE

LSC 006 REV. 01

               5

1.3

READ CAREFULLY THE FOLLOWING INSTRUCTIONS AS THEY
PROVIDE IMPORTANT WARNINGS FOR THE SAFE USE AND
MAINTENANCE OF THE MACHINE.

This equipement is to be used only for the purpose it was intended for and needs to be installed in a place
suitable to its use. Any other use is therefore to be considered as improper and irrational. The manufacturer
is not liable for any damage caused by improper, wrongful or unreasonable use.

Installation must be carried out according to local regulation and to the manufacturer’s instructions. A wrong
installation may cause damage to animals, people or things. The manufacturer is not liable for any damage
caused by an improper installation.

The electric safety of this appliance will be fully achieved only after its proper and correct installation
to ground as required by laws in force.

It is necessary to have qualified personnel checking this important requirement. The manufacturer is not
liable for damage caused by the lack or inefficiency of a correct installation to ground.

The use of any electrical appliance requires observance of the following important rules:

Do not touch the appliance with wet or damp hands or feet.

Do not use the appliance barefooted.

Do not pull the power feeding cable to unplug the appliance.

Do not allow children or unqualified personnel to use the appliance.

Before doing any maintenance or cleaning operation, disconnect the appliance from the electric main
source.

In case of damage or malfunction of the machine or damage of the electric feeding cable, turn the machine
off completely without trying to fix it yourself. Call the nearest authorized Service Centre.

In order to grant the proper efficiency and operation of the equipment, it is required to follow the
manufacturer’s instructions carrying out a regular maintenance program.

The machine has a protection level against water IPX2.

The protection from electric shocks of the machine is class I.

The appliance is supposed to operate in a place where the environment temperature is within the range +5

°

C  and 40

°

C.

The appliance is not supposed to operate in the  external environment, that is to say directly subject to
atmospherics

.

The appliance is supplied without water in the boiler, in order to avoid that exposures to low
temperatures could damage it. For the same reason, in case the appliance should remain unused
for a long time, remove water from the boiler before disconnecting it.

The non-compliance with what above stated could jeopardize proper function of the appliance and
its life.

In case the appliance should remain unused for a long time in a place, where the temperature is lower
than 0

°

C, before starting it again, call a technical service centre so as to have it being checked.

Summary of Contents for S1 Rossini





















Reviews: