INSTRUCTION MANUAL
22
LSC 014 -UK- REV. 01
ROUTINE APPLIANCE MAINTENANCE TO BE PERFORMED BY THE
CUSTOMER
To grant efficient equipment and correct operation, it is necessary to follow the manufacturer’s instructions,
carrying out cleaning and routine maintenance.
WARNING
Cleaning and routine maintenance operations must be carried out by the user according to the
manufacturer’s instructions, listed here below. Before carrying out any kind of cleaning operation,
disconnect the appliance from the mains power.
Cleaning and routine maintenance operations must be performed when the machine is cold and
wearing protective gloves to avoid abrasions.
Do not use jets of water to clean the appliance.
DAILY AT THE END OF WORK
•
Switch off the appliance, let it to cool down and then clean the filter holder (11) and filters, making sure
that no dirt is left inside the filter holder and that all filter holes are clean (use an abrasive sponge for
this operation).
•
Clean the shower heads below the delivery group (10) with the brush provided.
•
Clean the drip tray (1) and the drip tray grid (12), using standard detergents if necessary.
EVERY TWO WEEKS
After turning off the machine, remove the shower heads using the wrench provided; brush them carefully,
making sure that all the holes are clean and then reassemble them following the sequence illustrated in
the figure here below.
Use a rough sponge to clean any scale build up from inside the tank (4).
WARNING
Every day, at the end of work and after daily cleaning, turn off the appliance using the ON/OFF
button and disconnect it from the mains power.
a
b
c
Fastening screw
Small shower head
Large shower head
Shower head block
Delivery group
d
e
7
e
d
c
b
a