MANUAL FOR USE AND MAINTENANCE
LSC 001 -UK- REV. 06
21
To program the switching on and off times, proceed as follows:
1. Press and hold down the button
about 5 seconds; the display will show the flashing symbol
and “
P”.
2. Press the button
to enter the
TIMER MENU; the display will show:
Where “
OFF” is visualized by default.
3. If “OFF” is confirmed using the button
, the
TIMER menu is closed and display returns to showing
the flashing symbols
and “
P”.
If “ON” is selected with the button
, symbol
disappears and, and confirming with the button
, this will open the menu for setting the automatic appliance switching on and off times.
The display will show:
Where the numbers indicating the switching on time for Monday “
DAY 1” will flash as default.
4. Use the buttons
and
to set the hour at which the appliance must switch on and confirm it
using the button
.
5. The minutes will start to flash.
6. Use the buttons
and
to set the minutes of the time at which the appliance is to switch on
and confirm using the button
.
7. Use the buttons
and
to select the time at which the appliance is to switch off and confirm
using the button
.
8. Use the buttons
and
to select the minutes of the time at which the appliance is to switch off
and confirm using the button
.
9. The number corresponding to the day of the week is automatically increased; therefore, repeat the
operations in steps
4 to 8 to set the switching on and off times for the remaining days.
At the end of the programming phase of the weekly
TIMER, soon after confirming the switching off time
for day no. 7, the display will show the flashing symbols
and “
P”.
