MANUAL FOR USE AND MAINTENANCE
14
LSC 001 -UK- REV. 06
2.3
ROUTINE APPLIANCE MAINTENANCE TO BE PERFORMED BY THE USER
NOTE. To grant the efficiency of the appliance and to maintain correct operation, it is necessary
to follow the manufacturer’s instructions as to cleaning and regular maintenance.
WARNING!
Cleaning and routine maintenance operations must be carried out by the user according to the
manufacturer’s instructions given here below. Before carrying out any kind of cleaning operation,
disconnect the appliance from the electricity mains and from the gas system (if fitted). Cleaning
and routine maintenance operations must be carried out when the machine is cold and using
protective gloves to prevent abrasions.
DAILY AT THE END OF THE JOB
1a) Replacing the water in the boiler (Range New - Rapid - Spazio).
After turning off the appliance, replace the water in the boiler as follows:
• Place a container that can withstand high temperatures below the hot water nozzle (7) to prevent any
hot water spills.
• Turn the hot water knob (6) anticlockwise until the boiler is completely empty, checking the level gauge
(2). Refill the boiler immediately using the manual filling button (1).
1b) Replacing the water in the boiler (Range S3 - EK – EP models).
• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any
hot water spills.
• Press and hold down the hot water knob (6) for at least 5 seconds: the automatic boiler emptying cycle
will begin (all machine controls are deactivated during this phase). On the
EK model, the LEDs 18-21
are flashing during this phase while the LEDs 19-20 remain lit.
• At the end of the cycle, the appliance restores the correct water level in the boiler through the automatic
refill system. To interrupt this cycle, it is sufficient to hold down the hot water button (6) for about
2
seconds.
• Disconnect the appliance.
1c) Replacing the water in the boiler (Range S5 - Compact).
After turning off the appliance, replace the water in the boiler as follows:
• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any
hot water spills.
• Open the hot water valve (6), moving the lever upwards until the boiler is completely empty, checking
the level indicator (2). Refill the boiler immediately using the manual filling button (1).
1d) Replacing the water in the boiler on appliances with timed water delivery (optional) (Range S5).
• Place a container that can withstand high temperatures under the hot water nozzle (7) to prevent any
hot water spills.
• Press and hold down timed hot water delivery button (42) for at least 5 seconds: the automatic boiler
emptying cycle will begin (all machine controls are deactivated during this phase).
• At the end of the cycle, the appliance will restore the correct water level in the boiler using the automatic
filler. To interrupt this cycle, press the hot water delivery button (42).
• Disconnect the appliance.
