MANUAL FOR USE AND MAINTENANCE
20
LSC 001 -UK- REV. 06
HOT WATER DELIVERY FOR THE PREPARATION OF TEA, INFUSIONS, ETC.
a) Place the pitcher below the hot water nozzle (7).
b) Press the delivery button (6).
c) Delivery stops after the time programmed during installation.
WARNING!
Do not press the timed hot water delivery button (6) before placing the pitcher beneath the hot
water nozzle (7), in order to avoid possible burns.
ELECTRIC CUP WARMER
For additional heating for the cups, it is possible to use the additional electric cup warmer. Press the cup
warmer operating button
and check its operating status through the lighting up of the symbol
on the display (33). To switch it off press the same button.
TIMED FUNCTION (available with version 8 software)
The appliance can be programmed to show the coffee delivery time, in seconds. This function is used to
make sure that delivery time is correct.
NOTE. The average time for a coffee dose delivery time is approximately 25-30 seconds. If the
delivery time does not fall within this time, use the grinder and doser to adjust the grain size of
ground coffee.
To have access to the timer function, proceed as follows:
1. During delivery, press the button
, the display will show:
Where “
13” indicates the seconds, “57” the tenths of a second and the number “2” indicates the group for
which the delivery time is being displayed.
2. Use the buttons
and
to select the group for which to view the timer.
To return to the standard display, press the button
again.
TIMER FUNCTION
The appliance can be programmed so as to switch on and off automatically at set times on each day of
the week.
