33
5. USE INSTRUCTIONS
It is recommended to install your device in a place
where the ambient temperature is between 16 -
43°C
. If the ambient temperature is above or below the recommended temperature, the performance
of the unit may be affected and it may not be possible to obtain a temperature between 5 - 20 °C.
The above temperatures may fluctuate depending on whether or not the interior bulb is ON or OFF or
whether the bottles are located on the upper/middle or lower section.
MZ2V135/ MZ2V165 control panel
RUN light:
indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
UPPER CHAMBER
: display of the actual temperature of the upper chamber.
LOWER
CHAMBER
: display of the actual temperature of the lower chamber.
°C / °F light:
when the
℃
light is on, it indicates Celsius temperature; When the
℉
light is on,
it indicates Fahrenheit temperature.
°C/°F button:
Celsius and Fahrenheit conversion
button.
Button operation
SET button of the upper chamber:
temperature setting button; Once you press the button,
the temperature increases 1
℃
or 1
℉
. Setting range is between 5
℃
~12
℃
(41
℉
~54
℉
) for
MZ2V135. Setting range is between 12
℃
~20
℃
for the MZ2V165.
SET button of the lower chamber
: temperature setting button; Once you press the button,
the temperature increases 1
℃
or 1
℉
. Setting range is between 12°C-20°C (54
℉
~68
℉
) for
MZ2V135. Setting range is between 5
℃
~20
℃
for the MZ2V165.
LIGHT:
Key
to turn on / off the light.
When you press the button
once, the permanent light automatically is on.
ON/OFF button:
power on and off button; Press the button, it starts; press it again, it stops.
Note
: The compressor will start to work about 5 minutes after it is power connected or
powered off. The temperature inside the cabinet will fluctuate and influence the refrigerating
effect if the surrounding temperature is too high or too cold.
