25
Installation of the handle
1
．
GASKET
2
．
SCREW
3
．
DOOR
4
．
HANDLE
1. OPEN THE DOOR
2. TAKE OUT A PART OF GASKET
3. ALIGN THE TWO HOLES OF THE HANDLE WITH THE HOLE ON THE DOOR
4. INSTALL THE TWO SCREWS
5. FINISHED
Electrical Connection
This appliance should be properly grounded for your safety.
This appliance requires a standard 220 Volt AC / 50Hz electrical ground outlet. Have the wall outlet
and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
The cord should be secured behind the appliance and not left exposed or dangling to prevent
accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never
unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from
the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage the power cord.
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized service center.
