40
English
6.3 Drawing hot water
Hot water is drawn by the appropriate spout and can be used to prepare infusions, tea, camomile tea, to heat
cups, to add water to an espresso and to obtain American-style coffee, and so on.
Modelli 100 S
Use the hot water drawing lever (lowering it, raising it or moving it to the side) to dispense hot water from the
spout.
Modelli 100 E
Drawing of hot water from the spout takes place automatically by pressing the key for the desired serving (the
amount of hot water is controlled automatically). The keypad has three keys. Two are for the programmed
servings and one is for manual servings or to stop automatic serving at any time.
6.4 Cup heater (optional)
The cup heater is used to increase heating of the upper cup support surface (by means of an electrical he-
ating element). Use the appropriate switch to activate or de-activate the cup heater. The cup heater heating
element is equipped with a working thermostat that controls the temperature of the cup support surface.
7. Programming the 100 E models
7.1 Programming of servings: espresso coffee and hot water
1) Turn the knob
1
of the main switch to position
0
(zero).
2) Press key
g
(continuous serving of first serving group) and while holding it
down, turn the knob of the main switch to position
2
. Release key
g
; the
machine will enter programming. Push button
g
and the same key of all
groups will flash.
Programme the espresso coffee servings using keys
A
,
B
,
C
,
D
,
E
,
F
:
3) Prepare the machine to dispense a single or a double coffee based on the
serving to be programmed. Place the cups under the serving spout.
4) Press once on the key for the serving to be programmed. Once the desired
amount of coffee has been reached, stop serving by pressing once on
push button
g
.
A
D
B
E
C
F
g
Note:
The “ideal” espresso serving is obtained with 7-8 grams of ground coffee per cup with a time of 25-35 secon-
ds and a volume of 25-30 cm
3
5) Repeat steps
3
and
4
for all of the keypads. If you want to programme the servings for all of the other
groups by copying the servings programmed on the first keypad, press once on the continuous serving
key for each serving group. The lED in the keys will remain on.
Programming of amounts of hot water using keys
h
,
i
:
6) Press once on key
h
(small tea) and dispense hot water. Press once on
button
l
(continuous serving) when the desired amount is reached.
7) Programme in the same way the amount for push button I (large tea).
8) Upon completion of programming, press once on key
g
(continuous
serving of first group) to save the settings. The espresso coffee machine is
now ready for use.
h
i
l
8. Routine maintenance
• No panel or fixed guard of the frame may be removed from the machine to carry out the
routine maintenance.
