background image

LA VENEZIA-17 ESPRESSO MACHINE USER MANUAL  

WARNING! 

Never expose hands and 

fingers directly under the 

water outlet during 

operation to avoid scalding 

or serious burns. 

 

 
If you want a complete switch off of the machine, then press the main switch (

1

). 

If you turn off the machine by pressing the main switch (

1

), the machine will not be turned on 

when the scheduled time for its start arrives. 

 

Normal operation 

ESPRESSO BREWING 

 

Unlock and remove the filterholder from the group. 

 

Fill the filter basket of the filterholder with ground coffee (the amount may differ 
depending of the filter size). For best result use freshly, ground espresso beans. 

 

Press down the coffee with a coffee tamper. 

 

Clean the borders of the filter (with a quick movement of the finger or the palm of the 
hand, since the filter holder is at a high temperature and can cause burns due to 
prolonged contact) 
Insert the filled filterholder into the group head and lock it into correct position. Place 
one or two cups beneath the outlet spouts. 

 

Select the desired option from any of the dose buttons and the coffee will start to 
pour. 

 

 

 

The LCD will show the selected dose: 

 

 

Once the programmed volume of coffee in the cup is reached, the coffee will stop 
pouring.  If you wish to stop the pouring before the programmed volume, then you 
can press any of the dose buttons again to stop it.  If you wish to modify the volume 
served, go to the “programming the dosage” chapter. 

 

Summary of Contents for Venezia-17


















Reviews: