Push the main switch (2). The warning
light in the switch turns on, to indicate
that the machine is under voltage (Fig.
Turn the hot water/steam knob (13)
anti-clockwise, about one turn
(Fig. C).
Place a container under the Turbo
Cappuccino (14).
Push the coffee switch
and wait until the water flows evenly (Fig. D).
Move the knob (13) back to its starting
position, turning clockwise. The water
will now flow through the boiler group
Turn off the coffee switch (3). Now the
machine is ready for normal operation.
Before first use only, it is recommended
to add two spoonfuls of bicarbonate to
the water, in order to clean the circuit of
possible impurities.
Rinse the tank (12) and repeat the
STARTING UP procedure, in order to
clean off the bicarbonate residues.
fig. D
The procedure set out on this page should be repeated every time the tank
(12) runs out of water, or after the machine has been out of use for a long
period.
Never use the machine when the water tank is empty.
The special pressurized filter holder
ensures the preparation of a good and
creamy genuine espresso coffee.
Insert the filter holder (6) under the boiler
group (11) and turn it from left to right
until it locks, in order to pre-heat it. Leave
the filter holder handle
(Fig. E).
The handle will now automatically turn
slightly back to the left. This little
movement ensures the perfect operation
of the filter holder, for a long time.
Check the water level in the tank (12) is
enough for the amount of coffee wanted.
Push the main switch (2).
Wait until the warning light in the coffee
switch (3) turns on
(Fig. F).
Now
the machine has reached the right
temperature to pump water.
Remove the filter holder from the boiler
group
(11)
and fill it with coffee using the
measuring spoon
(5) (Fig. G).
1 measure 1 coffee
2
measures 2 coffees
The quantity and pressing of the coffee
powder directly affect the quality and
flavour of the espresso.
Slightly press the coffee with the
measuring spoon
then clean the
filter holder brim of any coffee residues
(Fig. H).
Install the filter holder (6) in the boiler
group
as described above.
Put two pre-heated cups under the filter
holder.
Push the coffee switch (3). When the
required amount of coffee has run into
the cups, turn the coffee switch off.
After having made coffee, remove the
filterholderandemptythecoffeegrounds.
Then, rinse the filterholder under running
water