To ensure your machine works well and to avoid any damage to you or
your property, some simple safety precautions are listed below. it is
recommended that you follow them carefully:
Read this manual carefully and keep it ready for future use.
Do not touch hot surfaces.
In order to avoid fire, electric shocks or personal injury, do not dip the
machine, the power cord and other electrical components into water.
install the machine in a safe place, well away from any direct heat source
and out of children’s reach.
Before disconnecting the machine from the mains, make sure that all
switches are off.
When the machine is not in use, or before cleaning it, unplug the machine.
Do not operate the machine when it is not working correctly, or when the
power cable/plug is damaged.
Do not use the machine outdoors.
Do not use the machine for other uses than it is intended for.
Before operating, make sure that the water level in the tank is adequate
and the hot water/steam knob is closed.
in order to avoid any damage, only use manufacturer’s parts.
Do not remove the filter holder while coffee is being made.
Observe the descaling suggestions.
The coffee machine “ESPRESSO INN” is intended for domestic use only
and not for professional use.
Before FIRST USE, make sure that the mains voltage matches the voltage
shown on the data plate under the machine.
in the case of a fire, use a carbon dioxide (CO,) based extinguisher. Do not
use water or powder extinguishers.
Model
Dimensions
Weight
Tank capacity
Steam delivery
Power cord
Max. pressure
Power supply
Absorbed power
Thermostats
Soiler
Protections
Accessories
Thermoprotection 100°C thermostat, safety valve
Measuring spoon, pressurized filter holder
(mechanical), Cappuccino Automatic,
Turbo Cappuccino, User’s manual,
filter for coffee capsules.
ESPRESSO INN
265 mm; H= 410 mm; D= 240 mm
7 kg
1.31
5 minutes
160 cm ca.
15 bar
Service type for coffee
temperature
Stainless steel, with 900 W heating element
Take off the cover
(1)
and remove the
tank (12) from the machine; fill the tank
with fresh water and reinsert it into the
machine (Fig. A).
Check the switches (2-3-4) are off.
Plug the power cable (9) into the mains.