La Pavoni DAYTONA 1-POWER, Technical Instructions

Page: 47 / 82

383033GB Pag. 47 November 2003
8) ALARM DATA MEMORY
Only the technician’s card can enter this programming level.
The display shows:
SYSTEM INFORMATION
ALARM DATA MEMORY
Press the key N°16 (3.4.5…X) to display the available levels.
Press the key N°13 (1x) or N°14 (2x) to display alarm data memory.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
The display shows:
ALARM DATA MEMORY
X YYYYY Z
Where:
X
is the alarm number; X=1 latest alarm.
YYYYY is the description of the alarm.
Z is the number of times the alarm occurred in a row (2-255)
Press key No. 16 (3.4.5…X) to memorize the alarm control performed.
ALARM DATA MEMORY
X YYYYY Z
♦
Where:
♦
indicates that the alarm has already been inspected by the technician.
WARNING:
a) The maximum alarm number the machine can save is 10.
b) To reset the alarm data memory, carry out “preset machine” procedure.
The alarms that will be saved in case of breakdown are the following:
1) Upper group motor alarm
2) Lower group motor alarm
3) Steam boiler filling up alarm
4) Boiler minimum level alarm
5) Volumetric meter time-out alarm
6) Coffee boiler temperature alarm
7) Steam boiler temperature alarm
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
9) SMART CARD PROGRAMMING
The display shows:
SYSTEM PROGRAMMING
SMART CARD PROGRAMMING
Press the key N°16 (3.4.5…X) to confirm entering the environment.
Press the key N°13 (1x) o N°14 (2x) to display the available environments.
Press the key N°16 (3.4.5…X) to confirm entering the desired environment.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
The display shows:
DEVICE CODE
XXXXX
WAITER’S CARD
CREATION
WAITER’S CARD
NUMBER RELEASE
OWNER’S CARD
CREATION