La Pavoni DAYTONA 1-POWER, Technical Instructions

Page: 23 / 82

383033GB Pag. 23 November 2003
DOSE PROGRAMMING PROCEDURE
To enter programming mode, proceed as follows.
Insert the owner or technician’s smart card into the proper slit ,with machine ON or OFF.
Press the key N°16 (3.4.5…X) for 5 seconds, the display shows:
DOSE PROGRAMMING
SELECT BUTTON
WARNING:
a) During selection key programming, it is possible to choose another selection key, remaining in the same
programming level, if the selection key is enabled to this function
b) When the technician’s smart card is inserted the machine can be programmed even in OFF mode.
c) After 30’’ time-out, any type of mode and/or programming environment will be abandoned.
1) BEVERAGE NAME PROGRAMMING
Press a selection button, the display shows:
DOSE PROGRAMMING
SELECT NAME
TY XXXXX
Where:
T Y indicates the number of the selected button.
XXXXX indicates the name of the selected button.
Press the key N°13 (1x) or N°14 (2x) to modify the level mode.
Press the key N°16 (3.4.5…X) to confirm the modification carried out and shift to the next level
Press the key N°15 (gost2) to shift to the next level without saving the modifications carried out.
Press the key N° 12 (gost1) to return to the previous environment and/or exit.
The available choices are the following:
COFFEE-BASED DRINKS MILK-BASED DRINKS FILTER DRINKS
Kaffee creme Schnaps Cappuccino Caffè latte Pot Decanter
Espresso Kaennchen Macchiato Renversè Jug Becher
Coffee Lutz Latte macchiato Cafè au lait Filter Kaffee
Kaffee Fertig Milchkaffee Cafè chauffeur
Black coffee Grosser brauner Café 2 Espressi
Ristretto Kleiner brauner 2 Ristretti 2 Cafés
Schale Verlaengerter
Entkoffeiniert Melange ONLY-MILK DRINKS NO DRINK
Koffeinfrei Schuemli Lait chaud Latte Disabled
Fruehestueck Cafè petit dèjeuner Milk Milch
SERVICES
Sans cafèine
espresso Sans cafèine
caffè
Group cleaning Milker cleaning
WARNING:
a) Depending on the type of chosen drink, the necessary programming levels will be activated to set the drink.
b) If the chosen drink refers to “FILTER DRINKS”, the coffee group cycle will be automatically modified so that ground
coffee is not pressed. Besides, additional programming levels are activated, enabling to optimise the infusion of the
selected drink.
c) If the selected name is not enabled, the button will not be enabled to dispensing.
d) If the selected name refers to “SERVICES”, the button is enabled to group or milker cleaning function (see par.
automatic cleaning cycle procedure).