La Monferrina G2, User And Maintenance Manual

Page: 16 / 58

Safety IMPERIA & MONFERRINA S.p.A.
12 G2
GB
If an unforeseen process or operation is carried out, following a procedure
different to that indicated in the handbook, before proceeding, contact
IMPERIA & MONFERRINA S.p.A. .
If the Customer installs equipment on the machine that has not been
supplied by
IMPERIA & MONFERRINA S.p.A. it is necessary to check
that the safety conditions required by Directive 2006/42 EC are
maintained, and in any case
IMPERIA & MONFERRINA S.p.A. shall not
assume the responsibility for any problems that arise due to the use of
this equipment.
The machine is not to operate in corrosive or explosive environments.
Keep the machine clean and free of extraneous material such as debris,
oil, equipment or other objects that could damage functioning and injure
the operator.
An oily, wet or greasy floor could cause accidents.
Immediately dry and carefully clean any liquid or grease that forms on the
floor during interventions on the machine.
Do not use inflammable or toxic solvents for cleaning.
Avoid prolonged contact with solvents and do not inhale the vapours.
Do not use near naked flames or sources of heat; make sure there is
adequate ventilation.
Long overloads or failures could cause overheating of the electric motors
and electrical equipment developing harmful fumes; cut off the power
immediately and do not approach the machine until the fumes have been
dispersed by adequate ventilation.
In the case of fire, never use water sprays on the machine. Use CO
2
extinguishers.
The operator, any assistant technician and the maintenance engineer are
to use the appropriate personal protection devices when operating on the
machine.
When necessary, use head sets if the noise in the working area exceeds
85 dB (A).
Wear appropriate working clothes.
Long hair is to be gathered into a net, to avoid risks of entanglement.
Handle the blades supplied for the dough-cutter motor with care.
The skills for the various activities, for the machine operation are to be
clearly established as indicated in the chapter “Professional figures
enabled to operate on the machine”.