La Monferrina G2, User And Maintenance Manual

Page: 10 / 58

Machine description IMPERIA & MONFERRINA S.p.A.
6 G2
GB
If the claim proves to be unjustified, all repair and/or part replacement
costs shall be borne by the customer.
The guarantee certificate and the carriage note/invoice must be shown to
the technical personnel carrying out repairs or must accompany the
machine sent for repair.
The guarantee is not extended following technical work performed on the
machine. Repairs are carried out at our “Technical Assistance Centre” at
our works and the part/s involved must arrive with carriage paid (carriage
expenses borne by the customer unless agreed differently).
The guarantee does not however cover: accidental damage, in transport,
through negligence or inappropriate treatment, incorrect use not
conforming with notes shown in the instructions booklet and anyway
caused by phenomena not depending on the regular functioning or use of
the machine.
The IMPERIA & MONFERRINA S.p.A. company declines all
responsibility for any harm to persons or damage to property arising from
bad or imperfect use of the machine.
Professional qualifications of persons enabled to operate on the machine
The machine is to be used only by authorised persons who have been
instructed for the purpose; the same precaution is valid for the persons
who shall carry out the maintenance. Do not permit unauthorised persons
to approach the machine when running or during maintenance.
After receiving all the instructions necessary, only the following
professional operators are permitted to work on the machine:
Safety officer
The safety officer is responsible for protection and prevention of risks in
the company, as specified in the European Directive 89/391 EEC (Safety
in the workplace), acknowledged in Italy by D.L. Executive Order of
12/11/1994.
The safety officer shall ascertain that all the persons operating on the
machine have received all the relevant instructions contained in this
handbook.
Operator (in charge of running the machine)
Trained operator qualified to run the machine (work cycle, any
adjustments, etc.).
This operator shall only carry out the operations specifically assigned and
described in this handbook.
It is most important to avoid that the machine is not used by unskilled
persons.