background image

EN

4

8) Using any electrical device requires that 
certain fundamental rules be observed. In 
particular:
- do not touch the device with wet or 

moist hands and feet

-  do not use the device while not wearing 

shoes

- do not use extension cords in bath or 

shower rooms

-  do not unplug the device from the power 

outlet by pulling on the power supply 
cable

-  do not expose the device to atmospheric 

agents

-  do not allow children or untrained people 

to use this device

9) Before performing any maintenance and/
or cleaning operations (other than back-

flushing the group), turn the main switch 

to the “0” or OFF position, and disconnect 
the machine from the electrical network 
by unplugging the cord or by switching 
off the relative circuit breaker. For any 
cleaning operation, follow exclusively the 
instructions contained in this manual.

10) If the machine is operating in a faulty 
manner or stops working, disconnect it 
from the electrical network (as described 
in the preceding point). Do not attempt 

to  repair  it.  Contact  a  qualified  and 
authorized  professional  to  perform  any 

repair. Any repair must be performed 
exclusively by the manufacturer or by 

an  authorized  centre  using  only  original 

parts. Non compliance with the above 
could compromise the safe operation of 
the machine.

11) In order to avoid dangerous overheating 
problems, it is recommended that the 
power supply cable be unfurled completely.

12) Do not obstruct air intake and exhaust 
grilles and, in particular, do not cover the 
cup warmer tray with cloths or other items. 

Minimum room temperature: 

5°C

Maximum room temperature: 

32°C

13) The machine’s power supply cable 
must not be replaced by users. In case the 
power supply cable becomes damaged, 
shut off the machine and disconnect the
machine from the electrical network by 
unpluging the power cord or switching off 
the relative circuit breaker and close off the 
water supply; to replace the power supply 

cord,  contact  qualified  professionals 

exclusively.

WARNING

THE MACHINE MUST BE INSTALLED SO THAT 

QUALIFIED TECHNICAL PERSONNEL CAN EASILY 

ACCESS IT FOR MAINTENANCE.

WARNING

HAZARDOUS VOLTAGE DISCONNECT FROM POWER 

SUPPLY BEFORE SERVICING.

WARNING

THIS APPLIANCE IS NOT INTENDED FOR USE BY 

PERSONS (INCLUDING CHILDREN) WITH REDUCED 

PHYSICAL, SENSORY OR MENTAL CAPABILITIES, 

OR LACK OF EXPERIENCE AND KNOWLEDGE, 

UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR 

INSTRUCTION CONCERNING USE OF THE APPLIANCE 

BY A PERSON RESPONSIBLE FOR THEIR SAFETY.

WARNING

IN ORDER TO PREVENT CRACKS OR LEAKAGE: DO 

NOT STORE OR INSTALL THE COFFEE MACHINE IN 

PLACES WHERE TEMPERATURE MAY CAUSE BOILER OR 

HYDRAULIC SYSTEM WATER FREEZING.

Summary of Contents for GS/3



















Reviews: