background image

EN

3

1. General Information

About this Manual
1)
 This operating guide is an integral and 
essential part of the product and must be 
supplied to users. Users  are asked to read 
the enclosed warnings and cautions
carefully, as they provide valuable 
information concerning safety during 
installation, operation, and maintenance.
This manual must be kept in a safe place 
and be available for consultation to new 
and experienced users alike.

Remove Machine from Packaging
1)
 Ensure product’s integrity by inspecting 
the packaging, making sure it presents 
no signs of damage which might have 
affected the enclosed machine.

2) Check the machine’s integrity after 
having carefully removed the packaging.
Packaging (boxes, plastic bags, foam parts 
and whatever else) must not be left within 
easy reach of children, due to the potential 
danger it represents, nor be discarded in 
the environment.

Safety Instructions
1)
 Check to see that data on the rating 
plate corresponds to those of the main 
electrical supply to which the machine will 
be attached.
This equipment must be installed to 
comply with applicable federal, state or 
local plumbing codes.

2) The installation must be performed 
according to local electrical and plumbing 
codes and regulations. The installation 
also must comply to the manufacturer’s
instructions, and must be performed by 

qualified and authorized personnel.

3) Incorrect installation may cause injury/
damages to people, animals or objects, for 
which the manufacturer shall not be held 
responsible.

4) Safe electrical operation of this device 
will be achieved only when the connection 
to the power outlet has been completed 
correctly and in observance of all local, 
national, and international electrical codes 
and safety regulations, and particularly by 
grounding the unit. Make sure grounding 
has been done properly as it represents a 
fundamental safety requirement. Ensure 

qualified personnel check such connection.

5) Furthermore, you must ensure that 
the capacity of the available electrical 
system is suitable for the maximum power 
consumption indicated on the espresso 
machine.

6) We do not recommend using adapters, 
multiple plugs and/or extension cords. 
If you cannot avoid using them, make 
sure that they are exclusively of the kind 
which conforms to local, national, and 
international electrical codes and safety 
regulations, being careful not to exceed 
the power and current ratings indicated on 
such adapters and extension cords.

7) This device must be used exclusively for 
the functions it has been designed and built 
for. Any other application is inappropriate 
and dangerous.
The manufacturer shall not be held 
responsible for any damages caused by 
improper and/or irrational use. This machine 
should not be installed in kitchens.

WARNING

THIS MACHINE IS FOR PROFESSIONAL USE ONLY 

AND SHOULD BE INSTALLED IN LOCATIONS WHERE 

ITS USE AND MAINTENANCE IS RESTRICED TO 

TRAINED PERSONNEL.  CHILDREN ARE FORBIDDEN TO 

OPERATE OR PLAY WITH THE MACHINE.

WARNING

THE MANUFACTURER DECLINES ANY RESPONSIBILITY 

FOR ANY EVENT LEADING TO LIABILITY SUITS 

WHENEVER GROUNDING HAS NOT BEEN COMPLETED 

ACCORDING TO CURRENT LOCAL, NATIONAL, AND 

INTERNATIONAL REGULATIONS AND ELECTRICAL 

CODES, OR OTHER ELECTRICAL PARTS HAVE BEEN 

CONNECTED IMPROPERLY.

Summary of Contents for GS/3



















Reviews: