background image

30 

 

Appendix D: Manufacturer Warranty  

All  La Marche Manufacturing  Co. equipment has been thoroughly tested  and  found  to be in proper  operating 
condition  upon  shipment  from  the  factory  and  is  warranted  to  be  free  from  any  defect  in  workmanship  and 
material that may develop within two (2) years from date of purchase. Battery pack is warranted for one (1) year.   

Any part or parts of the equipment (except fuses, DC connectors, battery and other wear-related items) that 
prove defective within a two (2) years period (for battery pack it is one (1) year) shall be replaced without charge 

providing such defect, in our opinion, is due to faulty material or workmanship and not caused by tampering, 
abuse, misapplication or improper installation.  

Should a piece of equipment require repair during the warranty period, the equipment can be returned to the La 
Marche factory to have the inspection, parts replacements and testing performed by factory personnel. Should it 

be necessary to return a piece of equipment or parts to the factory, the customer or sales representative must 
obtain authorization from the factory. If upon inspection at the factory, the defect was due to faulty material or 

workmanship, all repairs will be made at no cost to the customer during the first three years. Transportation 
charges or duties shall be borne by purchaser.  

In accepting delivery of the equipment, the purchaser assumes full responsibility for proper installation, installation 

adjustments  and  service  arrangements.  Should  minor  adjustments  be  required,  the  local  La  Marche  sales 
representative should be contacted to provide this service only.  

All sales are final. Only standard La Marche chargers will be considered for return. A 25% restocking fee is charged 
when return is factory authorized. Special chargers are not returnable.  

In no event shall La Marche Manufacturing Co. have any liability for consequential damages, or loss, damage or 
expense directly or indirectly arising from the use of the products, or any inability to use them either separately 
or in combination with other equipment or materials, or from any other cause. In  addition, any alterations of 
equipment made by anyone other than La Marche Manufacturing Co. renders this warranty null and void.  

La  Marche  Manufacturing  Co.  reserves  the  right  to  make  revisions  in  current  production  of  equipment,  and 
assumes no obligation to incorporate these revisions in earlier models.  

The failure of La Marche Manufacturing Co. to object to provisions contained in customers' purchase orders or 

other communications shall not be deemed a waiver of the terms or conditions hereof, nor acceptance of such 
provisions.  

The above warranty is exclusive, supersedes and is in lieu of all other warranties, expressed or implied, including 

any implied warranty of merchantability or fitness. No person, agent or La Marche Mfg is authorized to give any 
warranties on behalf of the Manufacturer, nor to assume for the Manufacturer any other liability in connection 
with any of its products unless made in writing and signed by an official of the manufacturer. 

 

 

 

 

 

 

Summary of Contents for CUPS

































Reviews: