10
3.2
Display
The CUPS is equipped with a display and three buttons, allowing the user to view the status of the UPS and make
any necessary changes.
Figure 7
–
Standby Mode
Once the CUPS has been energized and is supplying power to the loads, the user can press the Select/Down
button to view/scroll through the following parameters:
OUT
120
V
AC Output Voltage
IN
123
V
AC Input Voltage
BAT
54.6
V
Battery Voltage
OUT
60.0
Hz
AC Output Frequency
IN
60.0
Hz
AC Input Frequency
BAT
0.0
A
Battery Current
OUT
0.1
A
AC Output Current
IN
0.2
A
AC Input Current
BAT
83
%
Battery Capacity
OUT
0
%
Output Load Capacity
31.5
º
C
UPS System Temperature
The diagram on the bottom section of the display informs the user on the mode in which the CUPS is operating
in. Refer to Section 3.3 for the multiple operating modes available on the UPS system.
To enter the Settings Menu, the CUPS will need to be in Standby Mode. Press and hold the select button for 3
seconds. Refer to section 7.0. The Menu contains 19 parameters to set the UPS as needed.
To navigate through the menu, press the ON/MUTE button to navigate Up or the Select button to navigate Down
in the Menu.
