4
1.1.1 Wall-Mounting the A77 (10 & 477 Only)
The
10 & 477
enclosures of the A77 are shipped from the factory with the necessary brackets installed for
wall-mounting
(The same bracket is used for rear mounting on a 19” relay rack and cannot be removed). The
977
enclosure does not come with wall mounting equipment, it is not recommended to attempt to mount these
enclosures on any wall.
Wall-Mount Procedure
To wall-mount the A77, install four 0.25 in (6.4 mm) bolts on the wall rated to support the charger weight plus
a safety factor of at least two times (for the
477
enclosure 6 bolts are needed). Place the A77 on the bolts, add
appropriate mounting hardware and tighten. Refer to the figures below for mounting dimensions and
specifications.
Figure 1 - Keyhole Slot Used
Figure 3 – 477 Enclosure Bolt Pattern
Figure 2 - 10 Enclosure Bolt Pattern
Summary of Contents for A77
Page 7: ......
