La Marche A75M Instruction Download Page 3

INSTRUCTION / TROUBLESHOOTING MANUAL FOR MODEL A75M  

PAGE 3 OF 13 

RECEIVING INSTRUCTIONS 

AND 

GENERAL EQUIPMENT INFORMATION 

 

CAUTION:  To ensure safe installation and operation, the information given in the 

instruction manual should be read and understood before installing or using the 

equipment. 

 

RECEIVING INSTRUCTIONS 

Unpacking and Inspection: Examine the shipping crate upon arrival.  If there is obvious damage, describe on 

the receiving documents.  Within a few days after delivery, the equipment should be uncrated and carefully 

inspected for hidden damages.  When removing packaging material, be careful not to discard any equipment, 

parts, or manuals.  If any damage is detected you should: 

1.

 

File a claim with the carrier within five (5) days. 

2.

 

Send a copy of the claim to La Marche Mfg. Co. 

3.

 

Call La Marche Mfg. For a RETURN MATERIAL AUTHORIZATION NUMBER. 

 

Failure to properly file a claim for shipping damages, or provide a copy of the claim to La Marche 

Mfg., may void warranty service for any physical damages reported for repair. 

 

HANDLING 
WARNING:  Equipment can be very heavy, and top-heavy.  Use adequate manpower or equipment 

for handling.  Until the equipment is securely mounted, care must be used to prevent the 

equipment from being accidentally tipped over. 

 

NOMENCLATURE PLATES 

Each piece of La Marche Mfg. Equipment shipped is identified by part number on the nomenclature plate. 

 

ADJUSTMENTS 

All equipment is shipped from the factory fully checked and adjusted.  Do not make any adjustments unless the 

equipment has been powered-up and the settings have been determined to be incorrect. 

 

SPARE PARTS 

To minimize downtime during installation or normal service, it is advisable to purchase spare fuses, circuit 

boards and other recommended components.  Please refer to the list of recommended spare parts and their La 

Marche Mfg. Part numbers included with the instruction manual.  It is recommended that spare fuses be 

ordered for all systems. 

 

To order spare parts, please contact La Marche Mfg. (847)-299-1188 during business hours and ask for the 

Parts Department. 

Summary of Contents for A75M














Reviews: