![background image](http://html1.mh-extra.com/html/la-fitness/runfit-99/runfit-99_owners-manual_666659015.webp)
14
2011/11/7 V1.1+V1.0
3-7
Centering The Belt
After installing and
leveling
the treadmill, check the belt to ensure that it is tracking properly.
First, plug the power cord into an appropriate
dedicated
outlet. Then, turn the treadmill ON. Have one
person stand on the
anti-slip pads
on either side of the treadmill frame. Do not stand on the running
belt at this time. Press the QUICK START key, and increase the speed to
4.0 mph (6.4kph).
If the striding belt moves to the right while it is running:
Turn
the right tension bolt a quarter-turn clockwise,
and then turn the left tension bolt a quarter-turn
counter-clockwise. See the illustration below. Allow the treadmill to run for 5 minutes.
This action should set the striding belt tracking back to center of the roller, if not, repeat process.
If the striding belt moves to the left while it is running:
Turn the left tension bolt a quarter-turn clockwise and then turn the right tension bolt a quarter-turn
counter-clockwise.
Allow the treadmill to run for 5 minutes.
This action should set the striding belt
tracking back to center of the roller, if not, repeat process.
NOTE:
Do not exceed one full turn of the adjusting screws in either direction. If, after one full turn,
the belt does not track properly.
Check with a qualified service company.
Summary of Contents for Runfit 99
Page 1: ...RUNFIT 99 OWNER S MANUAL ...