![background image](http://html1.mh-extra.com/html/la-fitness/runfit-99/runfit-99_owners-manual_666659012.webp)
11
2011/11/7 V1.1+V1.0
3-3
Adding SILICON
If necessary use the Hex Wrench to unscrew the bolt inside the Rear End Cap. Then pull the belt up and
daub some SILICON to the center of the board. After that, adjust the belt to the center of the deck, followed
by tightening the screw to the original set. It is suggested to examine the product twice a month.
※
We suggest that add silicone once at least six months to prolong the lifespan of
running board, running belt and some related parts.
Function of LUBRICATION REQUIRED
It will remind you to add lubricant when total distance added up to 2000Km(the distance is difference
with the levels of running belt). When restarting the treadmill next time, the character string of
“ LUBRICATION REQUIRED” will show on the screen and then into start/ready status after
continuously displaying for 1 minute.
Ps: When adding lubricant, check whether the lubricant in the running belt is dried up. If it is, then add
lubricant into it.
Cancel the character string of “LUBRICATION REQUIRED” displayed on the screen every time you
restart the treadmill. After adding lubricant, restart the power and then it will display the character string
of “LUBRICATION REQUIRED” for 1 minute on the screen. During the one minute, press speed up key
and speed down key at the same time. The number will turn to 0 after 5 seconds and cancel the character
string of “LUBRICATION REQUIRED” which will display until the next 2000km reach.
Summary of Contents for Runfit 99
Page 1: ...RUNFIT 99 OWNER S MANUAL ...