background image

 

 

16

2012/3/2Ver1.1+V1.0 

IV.

 

Mode Instructions

 

1.

 

For the treadmill is dynamo type, it need 25PRM above or 15VDC/

1000ma 

transformer to start the computer continuously. 

2.

 

When the treadmill not plug to the transformer, the computer will be totally powered 
by dynamo. While the rotate speed is lower than 40RPM, the computer will be 
powered by batteries. If not operated for

 30 seconds

, it will enter into electric save 

mode(the screen will shut down). 

3.

 

When stepping(40RPM

), the electric power will save automatically. 

4.

 

While the rotate speed is lower than 40RPM, it will display ”

RPM

”icon. 

When ”

RPM

”display for 15 seconds, it will enter into PAUSE MODE and back to 

start/ready menu after 45 seconds 

5.

 

Under electric save mode or PAUSE mode, when the rotate speed is higher than 

60

RPM, it will resume to start/ready menu. 

6.

 

Under Start/Ready mode or program control mode, if press 

key, it will enter 

into start-up of Manual run directly.(Parameters adopt the default value) 

7.

 

Under Start/Ready status, you can press 

key to choose Goal mode, Programs 

mode, Fitness Test Mode, HRC mode, USER mode or RACE mode in center window. 
The selected item will show by blue frame. 

 

   

 

8.

 

Program mode

After choosing PROGRAM, adjust parameter, or press

directly 

to start. 

9.

 

If the value is above 0, it will be executed by countdown. When the value returns to 
zero, the program is over. On the contrary, if the value is 0, it will be executed by 
count up. 

10.

 

PROGRAM has 32 levels in all. The setting time will be executed averagely by 32 
levels. 

11.

 

While setting any parameter, you can press

 

  to cancel the setting and back to 

the first parameter or program control menu. All the parameters will get back to the 
default value. 

12.

 

There are character strings to instruct the user how to operate under mode edit menu 
or parameter setting menu. 

13.

 

While running, the center menu goes contrarotate like along playground. On the 
bottom left corner will display the number of circles(LAPS) .Every circle is 0.4KM 

Summary of Contents for DK850BAF01AA





































Reviews: