25
Note:
Should after checking the above list and the outdoor temperature is still not received, then reset
the units (see
Resetting the Temperature Station
below).
POSITIONING THE OUTDOOR TRANSMITTER:
The Outdoor transmitter is supplied with a holder that may be attached to a wall with the three screws or
double-sided tape supplied. To attach to the wall using screws, please follow the steps below:
1.
Mark the wall using a pen through the holes in the holder to obtain the exact
drilling position.
2.
Drill holes in the wall at the points marked.
3.
Screw holder onto wall.
The Outdoor Transmitter simply clicks in or out of the holder. When inserting or removing the Outdoor
Transmitter to or from the wall holder please hold both units securely to avoid tearing the holder from the
wall.
