4
2. Open
the
battery
compartment, and
MAKE SURE
that the battery switch is in the
BATTERY
position (not the SOLAR position).
Battery switch in the BATTERY position
3.
Now locate the battery insulator tab, and gently pull to remove it.
4.
Slide the battery switch to the SOLAR position
5.
Battery switch in the SOLAR position
6.
Continue to section titled “
Setup After Changing/Installing the Battery in the Solar
Station”
TO INSTALL / REPLACE BATTERIES
The included alkaline rechargeable batteries should provide you with many years of service. If
your batteries need to be replaced, we suggest you use 2 fully charged the AA Alkaline.
Rechargeable batteries should be fully charged before inserting into clock.
Alkaline
rechargeable batteries must be used.
If you choose to use non-rechargeable batteries, the battery switch MUST be moved to the
BATTERY
position (not the SOLAR position). In this position, the solar cells do not charge the
batteries.
REGARDLESS OF THE TYPE OF BATTERIES INSTALLED, THE BATTERY SWITCH MUST
BE IN THE BATTERY POSITION WHEN THE BATTERIES ARE INSERTED.
If rechargeable batteries are used, the Battery switch should be moved to the SOLAR position
AFTER it is has been inserted.
To use non-rechargeable alkaline batteries:
1.
Remove the included rechargeable AA batteries from the compartment.
2.
Use the switch to select the alkaline battery (see below).
3.
Insert the batteries into the compartment, observing the correct polarity (see marking inside
battery compartment.
4.
Replace battery cover
