2
The solar-powered temperature transmitter uses solar cells to charge the rechargeable
batteries (2 x AAA rechargeable batteries; included).
The rechargeable batteries cannot be replaced.
SOLAR TRANSMITTER OPERATION MODES
Important:
Users need to press the reset key to activate the solar transmitter and link the
transmission to the Solar Station (receiver).
It is important to allow sufficient light to reach the solar panel while activating the solar transmitter.
Make sure the lights are on in the setup room and the solar panel is facing a 60W light bulb or
brighter -
do not cover with hands or other objects
.
Solar transmitter RESET key:
The solar transmitter has 3 operations modes:
Normal Operation Mode:
This mode occurs when the battery voltage is higher than 2.5V.
The transmitter will measure and transmit the temperature and humidity data to the Solar
Station every 8 seconds.
The environment brightness is checked every 5 seconds
If a dark environment is detected, it will measure and transmit the temperature every 16s.
If the battery voltage is dropped lower than 2.8V, it will measure and transmit the
temperature every 16s
If battery voltage is dropped lower than 2.4V, will go into Idle mode.
Note: only use a small pointed pen to
press the RESET key to re-active the
transmitter into Normal Operation Mode.
RESET key
