1.
Insert 2-AA batteries into your Outdoor Sensor.
2.
Insert the 5 volt power cord into an outlet, then into your Projection
Clock. Optional: Insert 2-AAA batteries for backup.
3.
Set time, date, etc.
4.
Once the sensor is reading to your clock, place the sensor outside in a
shaded location. View our sensor mounting video here:
Power Up
Atomic Time
2
616-146v4
Projection Clock
TX141v4
Outdoor Sensor
AAA
AAA
• The Atomic Time Signal icon will flash while searching, and be solid
when connected.
• Hold the
-/TIME
button anytime, to manually search for the Atomic Time
Signal.
• The backlight and USB charging port will momentarily turn off while the
clock searches for the atomic signal.
• For information about WWVB visit:
AA
AA
