Model: 513-1311OT www.lacrossetechnology.com/support Page | 4
Outdoor Temperature Alert
•
Hold the
ALERT
button for 3 seconds to
enter
high alert
setting.
•
Press the
+ or -
button to select the high
alert value.
•
Press the
ALERT
button to enter
low alert
setting.
•
Press the
+ or -
button to select the low alert value.
•
Press and release the
ALERT
button to confirm and
exit.
•
Press the
ALERT
button to turn the outdoor
temperature alert OFF or ON.
Outdoor Temperature Search
•
Hold the
SEARCH
button to search for the
outdoor sensor.
•
Press the
TX
button on the sensor.
•
The outdoor reception icon will flash while searching.
Reset Button
•
If the clock display appears distorted or is not responding to
buttons, use a pen or paperclip to press
RESET
one time.
•
This will reset the clock to default settings.
WWVB Radio-controlled Time
•
Hold the
- °C/°F
button to search for the WWVB time signal.
•
WWVB Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
Position Outdoor Sensor
•
Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
ALERT + 12/24 - °C/°F
High
Alert
Icon
Low
Alert
Icon
SEARCH
Outdoor
Reception
Icon
WWVB
Atomic Icon
- °C/°F
