background image

 

21

Remote Temperature Sensor 5 x 1.6 x .87 in 

(128 x 40 x 22 mm) 

 

W

ARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product.  
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for 
problem determination and service procedures.  Warranty service can only be performed 
by a La Crosse Technology, Ltd authorized service center.  The original dated bill of sale 
must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La 
Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no 
charge as stipulated herein, with new or reconditioned parts or products if found to be 
defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to La 
Crosse Technology, Ltd.   
 
Replacement parts and products assume the remaining original warranty, or ninety (90) 
days, whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and 
materials for all repairs covered by this warranty.  If necessary repairs are not covered by 
this warranty, or if a product is examined which is not in need or repair, you will be 
charged for the repairs or examination.   
 
The owner must pay any shipping charges incurred in getting your La Crosse Technology, 
Ltd product to a La Crosse Technology, Ltd authorized service center.  
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 
with the following specified exceptions: (1) damage caused by accident, unreasonable use 
or neglect (including the lack of reasonable and necessary maintenance); (2) damage 
occurring during shipment (claims must be presented to the carrier); (3) damage to, or 
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to 
follow instructions contained in your owner’s manual; (5) damage resulting from the 
performance of repairs or alterations by someone other than an authorized La Crosse 
Technology, Ltd authorized service center; (6) units used for other than home use (7) 
applications and uses that this product was not intended or (8) the products inability to 
receive a signal due to any source of interference. 
 
This warranty covers only actual defects within the product itself, and does not cover the 
cost of installation or removal from a fixed installation, normal set-up or adjustments, 
claims based on misrepresentation by the seller or performance variations resulting from 
installation-related circumstances. 

Summary of Contents for WT-5130ER
























Reviews: