background image

 

3

Moon Phase 
and Date LCD 

INVENTORY OF CONTENTS 

1. The 

WS-9043U

 weather station (Figure 1)   

2.

 

One TX4U remote temperature/humidity sensor (Figure 2) 

3.

 

Mounting hardware 

4.

 

Instruction manual and warranty card. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ADDITIONAL EQUIPMENT (not included) 

1.

 

Three fresh AA 1.5V batteries for the indoor weather station. 

2.

 

Two fresh AA 1.5V batteries for the remote temperature/humidity sensor. 

3.

 

One Philips screwdriver for mounting. 

 

ABOUT WWVB (Radio Controlled Time) 

The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio 
station is located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout 
the United States at 60 kHz. The signal can be received up to 2,000 miles away through the internal antenna in 
the Weather Station. However, due to the nature of the Earth’s Ionosphere, reception is very limited during 
daylight hours. The weather station will search for a signal every night when reception is best. The WWVB 
radio station derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists 
is continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These 
physicists have created an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-
133 atom in a vacuum. For more information on the atomic clock and WWVB please see the NIST website at 
http://www.boulder.nist.gov/timefreq/stations/wwvb.htm. 
 
 
 
 
 
 
 
 
 

Figure 1 

Time LCD 

Forecast LCD

Indoor LCD

Outdoor LCD

Figure 2 

Heat index and 
Dew point LCD 

Rain protection cover 

Wall mounting base 

Summary of Contents for WS-9043U




















Reviews: