13
3.
The record is now reset and will show the current time in the TIME LCD and current outdoor
temperature, humidity, heat index or dew point in the OUTDOOR LCD.
V.
MOON PHASE
There are 12 moon phases shown on the indoor weather station. Thus, when the moon icon is all white,
it is a full moon.
New Moon
Full Moon
Small Waxing Crescent
Large Waning Gibbous
Large Waxing Crescent
Small Waning Gibbous
First Quarter
Last Quarter
Small Waxing Gibbous
Large Waning Crescent
Large Waxing Gibbous
Small Waning Crescent
VI.
TIME ALARM
To set the time alarm:
1.
Press and hold the
ALM/+
button for 3 seconds.
2.
The alarm time will begin to flash in the DATE LCD.
3.
Press and release the
IN/HR
button to adjust the hour.
Note:
When in the 12-hour mode and setting an alarm for a time between noon and midnight,
“PM” will appear to the left of the alarm time in the DATE LCD.
4.
Press and release the
OUT/MIN
button to adjust the minutes.
5.
Press and release the
SNOOZE/CH
button to confirm the setting or wait for 15 seconds and
the display will automatically return to the normal mode.
To activate the alarm:
1.
Press and release the
ALM/+
button to toggle between the alarm time and the day and date.
2.
When the alarm time and alarm icon are showing in the DATE LCD the alarm is activated.
3.
When the day and date are showing in the DATE LCD the alarm is deactivated.
To activate the snooze:
1.
While the alarm is sounding press and release the
SNOOZE/CH
button.
2.
The snooze will be activated and the alarm will come back on after the selected time period.
VII. ADDING REMOTE TEMPERATURE/HUMIDITY SENSORS (OPTIONAL)
The
WS-9043U
is able to receive signals from 3 different remote temperature/humidity sensors.
The
remote temperature/humidity sensor model(s) that you choose will come with their own set of
instructions—follow these instructions for a complete guide to setting up. Following are some brief
