8
Foldout Table Stand
The foldout table stand is located on the backside of the Receiver.
Carefully pull out the stand and place the Receiver in the desired
location.
Wall Mounting
Place a screw in the desired location leaving the head extended
about ¼” from the wall. Hang the Receiver on the screw ensuring
that the Receiver locks into place
.
Positioning the Rain Gauge
Position the connected rain gauge outdoor to collect rainfall data.
Ensure that the rain gauge is placed in a secure and flat location
where it can properly collect properly rain quantity without
obstruction. Ensure also that the rain gauge is securely mounted
at the appropriate location otherwise it may not transmit accurate
rainfall data.
The rain gauge must be level to transmit correct readings. It is
recommended to mount the rain gauge 3 feet or higher off of the
ground. Screw the rain gauge down snugly in the holes provided
(but not too tight as this will affect the accuracy of the gauge).
Hanging Hole
Hanging Hole
Table Stand
