background image

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3.  DO NOT PRESS ANY BUTTONS FOR 15 MINUTES. 

4.  All segments of the LCD will light up briefly. Then 0.00 inch will 

be displayed in both sections of the LCD. If the “0.00” is not 
displayed after a few seconds, remove the batteries and wait 
for at least 10 seconds before reinserting them. 

5.  Place the rain gauge in an appropriate location. The rain 

gauge should be placed in a secure and flat location where it 
can properly collect properly rain quantity without obstruction. 
The rain gauge has a range of 330 feet.  Keep in mind that the 
330 feet is in open air with no obstructions and that radio 
waves DO NOT curve to go around objects.  Real-world 
transmission range will vary depending on what is in the path 
of the signal.  Each obstruction (roof, walls, floors, ceilings, 
thick trees, etc.) will effectively cut signal range in half.   

 

Example

:  A wireless rain gauge receiver with a 330 feet 

range is mounted on an interior wall, so that the signal has to 
pass through one interior wall, one exterior wall, and across 
the 10 feet width of the room between the 2 walls.  The first 
wall will reduce the range to 165 feet, and the second wall will 
reduce the range to 87 feet.  Factoring in the 10 foot room, this 
leaves a maximum of 77 feet of remaining signal range.   

Battery 

Cover

Battery  
Compartment 

Receiver 

Summary of Contents for WS-9004U













Reviews: