WWVB Radio-controlled Time
•
WWVB Icon will flash when searching.
•
The WWVB icon will be steady when time signal
received in the past 24 hours.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
Moon Phase
The LCD Moon phase is divided by 6
sections, showing a total of 12 phases of
the moon.
Note
: With the moon shown against a light
colored background, the phases will show opposite to a paper calendar.
The segments that are highlighted will portray the part of the moon that is
lit. For instance, the moon will be blank during a new moon and dark
during a full moon.
Low Battery Icon
•
When the TX icon is displayed replace batteries in
the outdoor sensor.
•
When the RX icon is displayed replace batteries
in the atomic clock.
Position Outdoor Sensor
•
Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•
The maximum transmitting range to the atomic clock is over 330 feet
(100 meters) in open air, not including walls.
Restart
If the outdoor temperature shows dashes, remove batteries from the
atomic clock and outdoor sensor. Press any button on the atomic clock
20 times. After 15 minutes, return to
Step 1
in “Get Started”.
WS-8418U-IT www.lacrossetechnology.com/support
Page |
!
4
Low
Battery
Icons
WWVB
Atomic Icon
