background image

This limited warranty begins on the original date of purchase, is valid only on products purchased 
and used in North America and only to the original purchaser of this product.  To receive warranty 
service, the purchaser must contact La Crosse Technology, Ltd for problem determination and 
service procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd 
authorized service center.  The original dated bill of sale must be presented upon request as 
proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized 
service center. 

 

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as 
stipulated herein, with new or reconditioned parts or products if found to be defective during the 
limited warranty period specified above.  All replaced parts and products become the property of 
La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.  Replacement 
parts and products assume the remaining original warranty, or ninety (90) days, whichever is 
longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs 
covered by this warranty.  If necessary repairs are not covered by this warranty, or if a product is 
examined which is not in need or repair, you will be charged for the repairs or examination.  The 
owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product 
to a La Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd will pay 
reasonable return shipping charges to the owner of the product. 

 

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the 
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect 
(including the lack of reasonable and necessary maintenance); (2) damage occurring during 
shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any 
accessory or decorative surface; (4) damage resulting from failure to follow instructions contained 
in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by 
someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units 
used for other than home use (7) applications and uses that this product was not intended or (8) 
the products inability to receive a signal due to any source of interference..  This warranty covers 
only actual defects within the product itself, and does not cover the cost of installation or removal 
from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the 
seller or performance variations resulting from installation-related circumstances. 

 

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE 
OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO BE USED 

 

19

Summary of Contents for WS-8256-AL





















Reviews: