background image

 

19

warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd will pay all 
expenses for labor and materials for all repairs covered by this warranty.  If necessary 
repairs are not covered by this warranty, or if a product is examined which is not in need 
or repair, you will be charged for the repairs or examination.  The owner must pay any 
shipping charges incurred in getting your La Crosse Technology, Ltd product to a La 
Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd will pay 
ground return shipping charges to the owner of the product to a USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 
with the following specified exceptions: (1) damage caused by accident, unreasonable use 
or neglect (including the lack of reasonable and necessary maintenance); (2) damage 
occurring during shipment (claims must be presented to the carrier); (3) damage to, or 
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to 
follow instructions contained in your owner’s manual; (5) damage resulting from the 
performance of repairs or alterations by someone other than an authorized La Crosse 
Technology, Ltd authorized service center; (6) units used for other than home use (7) 
applications and uses that this product was not intended or (8) the products inability to 
receive a signal due to any source of interference..  This warranty covers only actual 
defects within the product itself, and does not cover the cost of installation or removal from 
a fixed installation, normal set-up or adjustments, claims based on misrepresentation by 
the seller or performance variations resulting from installation-related circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH 
THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT 
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS 
PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to 
your State.  Some States do no allow the exclusion of consequential or incidental 
damages therefore the above exclusion of limitation may not apply to you. 
 
For warranty work, technical support, or information contact: 
 

La Crosse Technology 

2809 Losey Blvd. S. 

La Crosse, WI 54601 

Phone: 608.782.1610 

Fax: 608.796.1020 

 

e-mail: 

[email protected]

 

(warranty work) 

 

[email protected]

 

(information on other products) 

web: 

www.lacrossetechnology.com

 

 
 
 

Summary of Contents for WS-8010U





















Reviews: