5
DISPLAY MODES:
Press and release the SET button to view different display modes:
Outdoor temperature
in the first line on the left side and
outdoor humidity
in the second line on
the left side. Shows
indoor temperature
in the first line on the right side and
indoor humidity
in
the second line on the right.
Outdoor temperature
in the first line on the left side and
outdoor humidity
in the first line on the
right side. Shows
indoor temperature
in the second line on the left side and
indoor humidity
in
the second line on the right side.
Indoor temperature
in the first line on the left side and
indoor humidity
in the first line on the
right side. Shows
outdoor temperature
in the second line on the left side and
outdoor humidity
in the second line on the right side
NOTE
: Batteries are
not
replaceable in the sensor.
SOLAR-POWERED OUTDOOR TRANSMITTER (915MHZ RECEPTION)
The Weather Station receives outdoor data every 48 seconds. If it does not receive the temperature data
within 2 minutes after set-
up (or the display shows “- - -”), then please check the following points:
1. The distance of the Weather Station or the Sensor should be at least 6 feet (2 meters) away from any
interfering sources such as computer monitors or TV sets.
2. Avoid placing the Weather Station onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the same signal
frequency (915MHz) may prevent correct signal transmission and reception.
4. Neighbors using electrical devices operating on the 915MHz signal frequency can also cause
interference.
NOTE:
When the 915 MHz signal is received correctly, do not re-open the battery cover of the Weather
Station, as the batteries may spring free from the contacts and force a false reset. Should this happen
accidentally then reset
all units (see “
TO INSTALL / REPLACE BATTERY IN THE SOLAR STATION
”
and “
INITIAL SETUP
” above) otherwise transmission problems may occur.
The maximum transmission range is 200 feet (60.96 m) from the outdoor transmitter to the Solar Station
(in open space). However, this depends on the surrounding environment and interference levels. If no
reception is possible despite the observation of these factors, all system units have to be reset (see “
TO
REPLACE BATTERIES IN THE WEATHER STATION
” and “
INITIAL SETUP
”).
RESET Button
Mounting Bracket
