background image

 

 

 

 
PROGRAM MENU: 
SET THE TIME: 

Press and hold the SET button for 3 seconds to enter the time setting mode. 

 

 

 

HOUR

: The Hour digits will flash. Press and release the PLUS button to set the Hour. Press and 

release the SET button once.

 

 

 

 

MINUTES

: The Minute digits will flash. Press and release the PLUS button to set the Minutes. 

Press and release the SET button once.

 

 

 

SET THE SOLAR MODE ON/OFF: 

Solar Mode is a power-savings mode that reduces power consumption by monitoring and reacting to 
available lighting conditions (Default setting ON): 
 

 

SOLAR MODE

SOL

 will show in the lower display and the word ON will flash. Press and release 

the PLUS button to turn the Solar Mode OFF. 

 

 

 

 

NOTE

: The Solar Mode is used for saving the power consumption of the rechargeable battery 

(Default setting ON): 

 

 

 

Press and release the 

SET

 key to exit the setting mode and switch back to the normal display 

mode

 

 

SOLAR MODE ON THE WEATHER STATION 

 

If the solar mode setting is ON: 

  The surrounding environment brightness is checked every 5 seconds. 

  LCD will automatically turn OFF if the environment is too dark. 

  LCD will automatically turn ON if the environment is bright enough. 

  No information will be displayed when the LCD is OFF, but all the settings and operations will 

remain, except for the temperature and humidity measurements. 

 

If the solar mode setting is, OFF: 

  LCD will remain ON constantly.  

 
 

MIN/MAX TEMPERATURE READINGS: 
VIEW MIN/MAX

: Press and release the PLUS button to view: 

 

Outdoor Temperature minimum and maximum.  

 

Indoor temperature minimum and maximum.  

 

Current display. 

  

RESET MIN/MAX

: Press and hold the PLUS button for 10 seconds to reset the indoor and outdoor 

minimum and maximum temperatures to current temperatures. 
 
 
 

 

Solar Panel 

 
 

Temperature Display 

 
 

Time Display 

 
 

Function Buttons 

Summary of Contents for WS-6010U-IT










Reviews: