La Crosse Technology WS-2315AL Operation Manual Download Page 18

Resolution : 

1% 

Measuring Range Air Pressure 

8.85 inHg to 32.45 inHg 

 

 

(Standard air pressure at an 

   

altitude of  30,000 ft 

   

is around 8.85 inHg) 

Resolution . 

0.01 

inHg 

Relative humidity checking interval 

 every 30 seconds 

 
Alarm duration 

 2 minutes (approx.) 

 

Power consumption 
Base Station 

Batteries 

3 x AA, IEC LR6, 1.5V (Alkaline 
recommended)  

or AC power 

INPUT 120V AC 60HZ (use the 
provided AC/DC adapter only) 

Thermo-hygro sensor 

2 x AA, IEC LR6, 1.5V (or can 
draw power from the adapter if 
used) 

 
Battery life using 433MHz: 

approximately 12 months 

 

 

(alkaline batteries recom-

  

mended) 

 

Battery life using cable connection : 

approximately 

months 

 

 

(alkaline batteries recom-

  

mended)

 

Dimensions (L x W x H): 

Base Station 

:   6.1 x 1.2 x 6.3 inches 

Thermo-hygro sensor 

2.8 x 2.9 x 5.4 inches 

Rain sensor 

5.5 x 2.8 x 5.4 inches 

Wind sensor 

11.5 x 2.4 x 7.7 inches 

 

 

WARRANTY INFORMATION 

 
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product.  
To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for 
problem determination and service procedures.  Warranty service can only be performed 
by a La Crosse Technology, Ltd authorized service center.  The original dated bill of sale 
must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La 
Crosse Technology, Ltd’s authorized service center. 
 

La Crosse Technology, Ltd will repair or replace this product, at our option and at no 
charge as stipulated herein, with new or reconditioned parts or products if found to be 
defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to La 
Crosse Technology, Ltd.  Replacement parts and products assume the remaining original 
warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd will pay all 
expenses for labor and materials for all repairs covered by this warranty.  If necessary 
repairs are not covered by this warranty, or if a product is examined which is not in need 
or repair, you will be charged for the repairs or examination.  The owner must pay any 
shipping charges incurred in getting your La Crosse Technology, Ltd product to a La 
Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd will pay 
ground return shipping charges to the owner of the product to a USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 
with the following specified exceptions: (1) damage caused by accident, unreasonable 
use or neglect (including the lack of reasonable and necessary maintenance); (2) damage 
occurring during shipment (claims must be presented to the carrier); (3) damage to, or 
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to 
follow instructions contained in your owner’s manual; (5) damage resulting from the 
performance of repairs or alterations by someone other than an authorized La Crosse 
Technology, Ltd authorized service center; (6) units used for other than home use (7) 
applications and uses that this product was not intended or (8) the products inability to 
receive a signal due to any source of interference..  This warranty covers only actual 
defects within the product itself, and does not cover the cost of installation or removal 
from a fixed installation, normal set-up or adjustments, claims based on misrepresentation 
by the seller or performance variations resulting from installation-related circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH 
THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT 
TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS 
PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to 
your State.  Some States do no allow the exclusion of consequential or incidental dam-
ages therefore the above exclusion of limitation may not apply to you. 
 
For warranty work, technical support, or information contact: 
 

La Crosse Technology, Ltd 

2809 Losey Blvd. S. 

La Crosse, WI 54601 

Phone: 608.782.1982 

Fax: 608.796.1020 

 

e-mail: 

[email protected] 

(warranty work) 

 

[email protected] 

(information on other products) 

 

web: 

www.lacrossetechnology.com

 

Summary of Contents for WS-2315AL



















Reviews: