8.2 Relative or Absolute Pressure High Alarm Setting
1) Place your cursor over the relative or absolute pressure high alarm box and right click the mouse to open
the relative or absolute pressure alarm high window
2) Drag the cursor over the sliding scale to set the desired inHg pressure high or enter the inHg quantity in
the box provided
3) Click the alarm active box to set the relative or absolute pressure high alarm
4) Click the set button to confirm
5) The relative or absolute pressure alarm high alarm is now set and will activate when the set inHg level is
reached (for setting relative or absolute pressure high alarm setting from the base station, see main
instruction manual).
Note:
The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few
seconds for the program to calculate and confirm the setting
Once the alarm is entered into the Heavy Weather program, the information will be transferred to the
base station. In some situations, the alarm icon may not appear immediately on the base station’s
LCD but will appear after a short delay due the constant data communication between all the
sensors, base station and the PC.
8.3 Absolute or Relative Pressure Low Alarm Setting
1) Place your cursor over the absolute or relative pressure low alarm box and right click the mouse to open
the relative or absolute pressure low alarm window
2) Drag the cursor over the sliding scale to set the desired inHg pressure low or enter the inHg in the box
provided
3) Click the alarm active box to set the absolute or relative pressure low alarm
4) Click the set button to confirm
5) The absolute or relative pressure low alarm is now set and will activate when the set inHg level is reached
(for setting the absolute or relative pressure low alarm setting from the base station, see main instruction
manual).
Note:
The alarm bell icon may not appear immediately on the Heavy Weather program since it may take few
seconds for the program to calculate and confirm the setting
Once the alarm is entered into the Heavy Weather program, the information will be transferred to the
base station. In some situations, the alarm icon may not appear immediately on the base station’s
LCD but will appear after a short delay due the constant data communication between all the
sensors, base station and the PC.
