8 |
P a g e
• Outdoor LOW Humidity
• Outdoor HIGH Humidity
• Indoor LOW Temperature
• Indoor HIGH Temperature
• Indoor LOW Humidity
• Indoor HIGH Humidity
To set alerts:
1.
Hold the ALERTS button to enter alert set mode
2.
Outdoor LOW temperature alert OFF will show.
3.
If you wish to set this alert value, press the + or – buttons to arm this alert (ON).
4.
When the alert is armed (ON) press and release the ALERTS button and the alert value will
flash.
5.
Press the + or – buttons to change the alert value.
6.
Press the ALERTS button to confirm and move to the next alert.
7.
If you do not wish to set an alert, press the ALERTS button again to move the next alert.
8.
(When the alert is OFF (disarmed) press ALERTS button to skip setting that alert value).
Note: Press the LIGHT button at any time to exit.
HOW DO I DISARM ALERTS?
1. Hold the ALERTS button 3 seconds to enter alert set mode.
2. Press and release ALERTS button until you see the alert you wish to disarm.
3. Press the +/- buttons to disarm the alert. The alert text goes from ON to OFF.
4. Press the LIGHT button to exit.
WHAT HAPPENS WHEN AN ALERT SOUNDS?
•
When armed alert value is reached, station will beep 5 times each minute, until out of alert
range.
•
The flashing alert icon will indicate the type of alert HI or LO.
•
Press any button to stop the alert from sounding.
•
The alert icon will continue flashing while alert value is in alert range.
•
Disarm the alert to stop the alert entirely.
