background image

La Crosse Technology, Ltd.  

Page 5 

 

 

Freezer test

: Confirm the Weather Station is reading the correct outdoor transmitter. Place 

the transmitter in the freezer for an hour and watch the temperature drop on the Weather 
Station. 

 

Indoor distance test:

 Please complete the 

Restart

 with transmitter and Weather Station 5-

10 feet apart and inside to establish a strong connection.  

  After 15 minutes if there is a reading in the outdoor temperature area, move the transmitter 

to another room with one wall between the transmitter and the Weather Station. Observe to 
see if the temperature/humidity remains on consistently for 1-hour.  

  If the temperature/humidity remains on while in the house then it is likely a 

distance/resistance

 issue. Move the transmitter to different locations outside to find a 

location where the temperature/humidity reading will hold. 

 

Distance/Resistance

 can cause loss of transmitter signal.  

  Check 

Batteries

 
Outdoor Temperature/Humidity is stuck or OFL 

 

  The last outdoor reading may remain (not change) for several hours when connection is lost. 

  The outdoor temperature/humidity reading will flash when the connection is first lost or 

intermittent between the Weather Station and the outdoor transmitter.   

  Check 

Batteries

. Overpowered or underpowered batteries can cause this reading. 

  Replace outdoor transmitter. 

 

Outdoor transmitter fell and no longer works 

 

  If there is no physical damage to the outdoor transmitter, the fall may not have caused 

internal damage. 

  An outdoor transmitter that has fallen into a puddle or other standing water or snow may 

have water damage.  

  Transmitters are water resistant, not waterproof. 

  A fall can shock the transmitter or the batteries in the transmitter. Batteries that have fallen 

on a hard surface may be damaged and unable to function properly. 

  Complete a 

Restart

 with fresh batteries. 

  Use 

Batteries

 dated at least six years in advance of the current year. Batteries dated earlier 

than six years from now may still work, but may be unstable in performance. 
 

Outdoor Transmitter drains batteries quickly 

 

  Test a new set of alkaline batteries. Write down the date of installation and the voltage of the 

batteries. 

  When the batteries fail, please note the date and voltage again.  

  Check the 

distance

 and 

resistance

 between the transmitter and Weather Station. 

Transmitters at the end of the range may work while batteries are fresh but not after they 
drain a bit. 

  Check for leaking batteries, which may damage the transmitter. 

  Battery life is over 24 months when using reputable battery brands for both Alkaline and 

Lithium batteries. 

 
MIN/MAX Temperature readings 
 

  This Weather Station will show the daily minimum and maximum temperatures starting at 

midnight (12:00 AM).  

  The Weather Station will automatically reset the min/max temperatures at midnight (12:00 

AM).   

  You can manually reset the MIN/MAX data at any time. 

Summary of Contents for S98642
















Reviews: