background image

La Crosse Technology, Ltd.  

Page 7 

 

 

SENSOR AREA IS BLANK (NO DASHES OR NUMBERS) 

 

 

Check that other areas of the station read properly. There may be a problem with the station. 
 

ALERTS: WIND, TEMP, HUMIDITY  

 
Setting alert value and arming individual alerts are separate functions. 
  
• Hold the ALERTS button for 3 seconds to enter alert set mode. 
• High Wind Speed ON | OFF will flash. 

 
Alert ON: 

1. Press the + or - buttons to arm the alert. 
2. Press the ALERTS button and the alert value will flash 
3. Press the + or - buttons to set the alert value (Hold to set quickly). 
4. Press ALERTS button to move to next alert. 
 

Alert OFF: 

1. Alerts are OFF unless armed. If you do not wish to set an alert, simply press the 
ALERTS button again to move to the next alert. 
 

Alerts setting order: 

• High Wind Speed ON/OFF (CURRENT wind) 
• High Wind Speed Value 0-99mph (0-159kph) 
 
• Outdoor LOW Temperature ON/OFF 
• Outdoor LOW Temperature Value -40°F to 140°F (-40°C to 60°C) 
• Outdoor HIGH Temperature ON/OFF 
• Outdoor HIGH Temperature Value -40°F to 140°F (-40°C to 60°C) 
 
• Outdoor LOW Humidity ON/OFF 
• Outdoor LOW Humidity Value 10%RH to 99%RH 
• Outdoor HIGH Humidity ON/OFF 
• Outdoor HIGH Humidity Value 10%RH to 99%RH 
 
• Indoor LOW Temperature ON/OFF 
• Indoor LOW Temperature Value 32°F to 99°F (0°C to 37°C) 
• Indoor HIGH Temperature ON/OFF 
• Indoor HIGH Temperature Value 32°F-99°F (0°C to 37°C) 
 
• Indoor LOW Humidity ON/OFF 
• Indoor LOW Humidity Value 10%RH to 99%RH 
• Indoor HIGH Humidity ON/OFF 
• Indoor HIGH Humidity Value 10%RH to 99%RH 

ACTIVE ALERT  

 

 

When armed alert value is reached, station will beep five times each minute, until it is out of 
alert range. 

 

The flashing alert icon will indicate which alert is sounding. 

Summary of Contents for CA84688












Reviews: