La Crosse Technology, Ltd.
Page 10
Transmitting antennas from: ham radios, emergency dispatch centers, airports, military bases,
etc. may cause interference.
Electrical wires, utilities, cables, etc. may create interference if too close.
Vegetation is full of moisture and reduces signal.
Dirt: Receiving a signal through a hill is difficult.
WEATHER STATION
12-HOUR TIME FORMAT
Time display: 12-hour or 24-hour format.
Default is 12-hour time.
Use the Program Menu to switch time formats.
POWER REQUIREMENTS
3-AAA Alkaline batteries power the wind speed station.
MANUALLY SET TIME: PROGRAM MENU
The
SET
button will move through the program menu.
The
+ or -
button will adjust values.
Press the
WARNING
button at any time to exit.
Program Menu:
•
Beep On/Off
•
Hour
•
Minutes
•
12/24 Hour time format
•
Year
•
Month
•
Date
•
Fahrenheit/Celsius
•
MPH | KMH
The
SET
button will move through the program menu. To change a value use the
+ or -
button.
1.
Hold the SET button five seconds so that BEEP and the word ON will flash. Press and release
the + or - button to turn this to OFF to avoid beep sounds when pressing a button. Confirm with
the SET button and move to the hour.
2.
The hour will flash. Press and release the + or - button to select the correct hour. Confirm with
the SET button and move to the minutes.
3.
The minutes will flash. Press and release the + or - button to adjust the minutes. Confirm with
the SET button and select 12/24 hour time format.
4.
12HR FORMAT will flash. Press and release the + or - button to select the correct hour. Confirm
with the SET button and move to the year
5.
The year will flash. Press and release the + or - button to select the correct year. Confirm with
the SET button and move to the month.
6.
The month will flash. Press and release the + or - button to select the correct month. Confirm
with the SET button and move to the date.
7.
The date will flash. Press and release the + or - button to select the correct date. Confirm with
the SET button and move to F/C.
Note:
The Day of the Week will set automatically when the year, month and date are set.
