background image

 

 

  P a g e

| 19  

 

W EATHER FORECASTING ICONS 

 

 

 
For every sudden or significant change in the air pressure, the weather icons will update accordingly to 
represent the change in weather. 
 
Every time a new average pressure value has been obtained (once per minute); this value is compared 
with an internal reference value. If the difference between these values is bigger than the selected 
weather tendency sensitivity, the weather-icon changes, either for worse or for better. In this case, the 
current pressure value becomes the new weather tendency reference. 
 
If the icons do not change, either the air pressure has not changed or the change has been too small for 
the Weather Station to register. You may adjust the "sensitivity" of the pressure change check in the 
setting mode–see 

WEATHER TENDENCY SENSITIVITY 

in the manual settings above. 

 

The displayed icon forecasts the weather in terms of getting better or worse

 and not necessarily 

sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is 
displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air 
pressure has dropped and the weather is expected to get worse but not necessarily rainy. 
 

Note:

 After set up, readings for weather forecasts should be disregarded for the next 48-60 hours. 

This will allow sufficient time for the Weather station to collect air pressure data at a constant altitude and 
therefore result in a more accurate forecast. 
 
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting 
feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather Station 
has been designed for use. 75% accuracy is comparable to the best meteorological forecasting rate. In 
areas that experience sudden changes in weather (for example, from sunny to rain), the Weather Station 
will be more accurate compared to use in areas where the weather is stable most of the time (for 
example, mostly sunny). 
 
If the Weather Station is moved to another location significantly higher or lower than its initial standing 
point (for example, from the ground floor to the upper floors of a house), discard the weather forecast for 
the next 48-60 hours. The Weather Station may mistake the new location as being a possible change in 
air-pressure when really it is due to the slight change of altitude. 
 

W EATHER TENDENCY INDICATOR 

 
Working together with the weather icons is the weather tendency indicators (

arrows located on the left 

and right sides

 of the weather icons). When the indicator points upwards, it means that the air-pressure 

is increasing and the weather is expected to improve, but when the indicator points downwards, the air-
pressure is dropping and the weather is expected to become worse. 
 
For example, if the indicator is pointing downwards together with cloud and sun icons, then the last 
noticeable change in the weather was when it was sunny (the sun icon only). Therefore, the next change 
in the weather will be cloud with rain icons since the indicator is pointing downwards. 
 

Note: 

Once the weather tendency indicator has registered a change in air pressure, either the 

upward or downward tendency arrow will be displayed until the tendency changes again. 

Summary of Contents for C84612































Reviews: