background image

 

25 

WARRANTY 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 

 

This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this product. To 
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 
determination and service procedures. Warranty service can only be performed by a La 
Crosse Technology, Ltd authorized service center. The original dated bill of sale must be 
presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse 
Technology, Ltd’s authorized service center. 

 

La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge 
as stipulated herein, with new or reconditioned parts or products if found to be defective 
during the limited warranty period specified above.    All replaced parts and products become 
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, 
Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) 
days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and 
materials for all repairs covered by this warranty. If necessary repairs are not covered by this 
warranty, or if a product is examined which is not in need or repair, you will be charged for 
the repairs or examination. The owner must pay any shipping charges incurred in getting 
your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service 

 

26 

center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of 
the product to a USA address only. 

 

Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship 
with the following specified exceptions: (1) damage caused by accident, unreasonable use or 
neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring 
during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, 
any accessory or decorative surface; (4) damage resulting from failure to follow instructions 
contained in your owner’s manual; (5) damage resulting from the performance of repairs or 
alterations by someone other than an authorized La Crosse Technology, Ltd authorized 
service center; (6) units used for other than home use (7) applications and uses that this 
product was not intended or (8) the products inability to receive a signal due to any source of 
interference.. This warranty covers only actual defects within the product itself, and does not 
cover the cost of installation or removal from a fixed installation, normal set-up or 
adjustments, claims based on misrepresentation by the seller or performance variations 
resulting from installation-related circumstances. 

 

LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, 
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE 
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE 
USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS 
NOT A TOY. KEEP OUT OF CHILDREN’S REACH. 

 

 

27 

This warranty gives you specific legal rights. You may also have other rights specific to your 
State. Some States do no allow the exclusion of consequential or incidental damages 
therefore the above exclusion of limitation may not apply to you. 

 

For warranty work, technical support, or information contact: 

 

La Crosse Technology, Ltd 

2809 Losey Blvd. South 

La Crosse, WI 54601 

Phone: 608.782.1610 

Fax: 608.796.1020 

 

e-mail: [email protected] 

(warranty work) 

 

[email protected] 

(information on other products) 

 

web:www.lacrossetechnology.com 

 

 
 

 

28 

FAQ’s 

 

What is the charger capacity? 

Maximum charging capacity is 3000 mAh 

 

My batteries are getting warm. 

It is common for batteries to get warm will charging. The charger has a built in 
temperature sensor which will stop the charging cycle if it has become too hot. 
Charging may resume when the battery has cooled. 

 

Allow batteries to cool before placing into a product to be used. 

 

I cannot change modes. 

Within 8 seconds of installing a battery, press and hold the MODE button for 5 
seconds to change modes. 

 

Why does my display flash a number? 

Your station will flash when first plugged in. You’re a/c cord may be defective.   

 

Summary of Contents for Battery Charger









Reviews: